Replacing System Terminals - Mitel MiVoice Office 400 System Manual

Note:
The mainboard is not dismantled but replaced complete with metal housing.
7. The new communication server can now be reassembled, fitted and installed in the reverse sequence.
8. Carry out a first start of the system (see
from a backup file back on to the communication server.
6.3.6

Replacing system terminals

6.3.6.1 DSI system phones
6.3.6.1.1
Replacing a defective phone
Once the defective DSI system phone has been replaced by an identical phone the terminal configuration
data is automatically transferred.
Relocating a phone
The assigned port can be modified in the terminal configuration via WebAdmin, and the phone connected
on the new slot. The terminal configuration data is preserved.
6.3.6.1.2
If a phone is replaced with another type of phone, most of the terminal configuration data can be taken
over using Multi edit. A separate Multi edit (keys) function is available for the key configuration. Details can
be found in the WebAdmin help for the view Standard terminals.
6.3.6.2 DECT terminals
6.3.6.2.1
1. Dismantle the defective radio unit.
2. Fit the new radio unit.
Release 7.1
System Manual for Mitel SMB Controller
First start via
Phones with the same level of added features
Phones with a different level of added features
Replacing a radio unit
WebAdmin) and upload the configuration data
Operation and Maintenance
208