Annex
•
Maximum of 2 simultaneous call connections
Analogue terminal interface FXS
•
Configurable multifunctional interface for connecting analogue terminals and equipment.
•
The following applies for the FXS mode Phone / Fax, two-wire door and general bell:
•
Voice path with A/D and D/A conversion (standard PCM, A-law)
•
Transmission as per ES 201 168 (level country-specific)
•
Constant-current loop supply approx. 25 mA (with loop resistance £ 1000 W)
•
Receive pulse or DTMF dialling
•
CLIP display on 2 analogue terminals interfaces simultaneously.
•
Ringing supply 40...43 V 50 Hz at load 4kW; no DC voltage overlay (country-specific versions also
with 25 Hz)
•
No control key detection
•
No charge signalling pulses
•
For more technical details and cable requirements see
7.4.3
Communication server
Table 105: Dimensions and weights
Height
Width
Depth
Weight (excl. mains cord,
interfaces cards, modules and
packaging)
Table 106: Electrical isolation of interfaces
Interface
Analogue network interfaces
TIC-4AB
277
Multifunctional FXS
Mitel SMBC for wall mounting
65 mm
360 mm
294mm
2.4 kg
Mitel SMBC
0.2 kV
interfaces.
Mitel SMBC in rack mounting
65 mm
483 mm
294mm
2.5 kg
Operating isolation
System Manual for Mitel SMB Controller
Release 7.1