Installation; System Components - Mitel MiVoice Office 400 System Manual

Installation

•

System components

• Fitting the communication server
• Powering the communication server
• Earthing and protecting the communication server
• Equipping the Basic System
• Connecting the communication server
• Cabling interfaces
• Installing, powering, connecting and registering terminals
This Chapter tells you how the SMB Controller can be installed and the conditions to be observed. It also
includes the mounting into a 19" rack, the correct way to connect the earthing, and the power supply. Other
topics described in this chapter comprise fitting with system modules, interface cards and the relevant wiring
adapters. Finally the chapter also describes the network and terminal-side connection of the interfaces and the
installation, powering and connection of system terminals.
4.1 System components
The figure below shows the components of the Mitel SMB Controller complete with mounting options.
Release 7.1
System Manual for Mitel SMB Controller
Figure 8: System components with mounting options
4
84