Access Types With Smb Controller Manager; Access Types With Webadmin - Mitel MiVoice Office 400 System Manual

• Windows user name + password
The standard PIN "0000" is accepted, but must be changed during first login. You can choose any 2 to 10-
digit number combination.
5.3

Access types with SMB Controller Manager

Access the SMB Controller is only possible in the LAN with an Ethernet cable (directly or via a switch).
External access with the SMB Controller Manager is not possible.
5.4

Access types with WebAdmin

There are the following possibilities to access the MiVoice Office 400 communication server with
WebAdmin:
• In the LAN with an Ethernet cable (directly or via a switch)
• Externally via SRM (secure IP remote management)
Note:
External access (ISDN/analogue) with a dial-up connection is only recommended on some
conditions, for performance reasons.
First access on LAN
For a first access to the communication server, it is easier if your computer is located on the same subnet
as the PC. If this is not the case, you can also connect the computer directly to the communication server
using a LAN cable.
See also:
If the IP address of your communication server is not known or if your are setting up an MiVoice Office 400
communication system for the first time, read the chapter
Accessing the communication server on the LAN
If the communication server IP address is known, it can be entered directly in the address line of a web
browser. WebAdmin is started after the access data is entered. The computer only needs to be located on
the same LAN, but not necessarily on the same subnet.
Accessing the communication server from outside
For remote access to the communication server, we recommend SRM (Secure IP Remote Management)
secure IP remote management. For this, you need to install an SRM agent on your computer with which
Release 7.1
System Manual for Mitel SMB Controller
Getting started).
Configuration
178