System Modules - Mitel MiVoice Office 400 System Manual

Procedure:
1. Change the card and put the system into operation again. Similar procedure as described in
a defective interface
2.
In the WebAdmin view Cards and modules (
3. Configure new ports.
The system configuration data (User No., User configuration, etc.) of the terminals on the new ports is
created as new data (default values).
Table 81: Example: Expanding the number of terminal or network interfaces
TIC-2TS → TIC-4TS
TIC-2AB → TIC-4AB
6.3.3.4 Change slot
Interface cards can be moved to a different slot. The terminal configuration data of the system phones can
be transferred.
Procedure:
1. Change the slot and put the system into operation again. Similar procedure as described in
defective interface
Note:
The wiring adapter must also be changed to the corresponding slot.
2. Connect the system terminals to the ports of the new slot.
3. Reconfigure the port assignment.
4.
In the WebAdmin view Cards and modules (
old slot. The configuration data at the old slot location is now deleted.
6.3.4

System modules

The category system modules comprises the DSP modules stacked in slot SM1. DSP modules are
available in various versions (SM-DSPX1, SM-DSPX2, SM-DSP1, SM-DSP2). Compared with DSP
modules, modules with the designation DSPX are fitted with more powerful DSP chips.
Release 7.1
System Manual for Mitel SMB Controller
card.
The configuration data of terminal interfaces 3 and 4 are
created as new.
The configuration data of network interfaces 3 and 4 are
created as new.
card.
=4g) Confirm the new cards.
=4g) Confirm card in the new slot and Delete it from the
Operation and Maintenance
Replacing
Replacing a
204