Operations Supervision; Event Message Concept - Mitel MiVoice Office 400 System Manual

Table 90: Carrying out a first start and reset sales channel
No. PWR
[21]
[22]
[23]
[24]
[25]
[26]
6.5

Operations supervision

6.5.1

Event message concept

The system generates an event message every time an event or error occurs. The event tables are used
to specify how often an event message of a particular type may be generated by the system over a given
period before the event message is sent to the allocated signal destinations.
There are 7 event tables that can be allocated to 8 signal destinations:
Release 7.1
System Manual for Mitel SMB Controller
F0 F1 F2 F3
Figure 73: Distribution principle for an event message
F4 F5 F6 SYS
Operation and Maintenance
Duration Meaning
~11s Power is on,
begin of restart
~2s Do not touch
pilot key
~2s Press pilot key
to carry out a
first start and
reset sales
channel
~2s Confirmation
~50 Loading SMB
Controller
system software
Normal mode,
SMB Controller
is up and
running
222