Function Keys For Remote Maintenance Access; Configuring With Webadmin - Mitel MiVoice Office 400 System Manual

5.6.3

Function keys for remote maintenance access

On system phones the function code for enabling/barring remote maintenance access can be stored under
a function key, provided the user has the appropriate authorization.
The relevant LED lights up if remote maintenance access is enabled once or permanently.
The relevant LED goes off as soon as remote maintenance access is denied again, either automatically or
manually, using the function code or WebAdmin.
5.7

Configuring with WebAdmin

The configuration steps are based on the information determined during the planning and, where
applicable, the installation.
Whenever possible, use the planning and ordering software Mitel CPQ, to set up your communication
system. Mitel CPQ can be operated online after logging in at Mitel MiAccess https://miaccess.mitel.com/.
Mitel CPQ not only calculates the required hardware – it also lists the required licences for the planned
operation.
See also:
If you are setting up an MiVoice Office 400 communication system for the first time, read the chapter
Getting started.
Setup wizard
The WebAdmin setup wizard takes you step by step through the setup of a basic configuration and is
suitable for initial communication server setup. The setup wizard is automatically called up when a new
communication server is installed. Logging on as administrator in WebAdmin (expert or default mode)
allows you to also start the setup wizard directly from the WebAdmin navigation tree.
The setup wizard comprises the following steps:
1. Activating licences
2.
Viewing the IP addressing
3. Configuring media resources
4. Setting up the numbering plan
5. Setting up SIP providers
6.
Setting up users, terminals and DDIs
7. Setting up the auto attendant
For each step you can display a help page or see it in the lower part of the window where it is already
displayed. You can skip individual steps of the setup wizard or exit the setup wizard at any time in order to
return to the WebAdmin start page.
Configuration assistant
Release 7.1
System Manual for Mitel SMB Controller
Configuration
186