Kubota WSM 07-E3B Series Workshop Manual page 211

07-E3B SERIES, WSM
Replacing Flywheel Housing Oil Seal
1. Remove the used oil seal (2).
2. Clean the new flywheel housing oil seal (2) and apply engine oil
to it.
3. Install the new oil seal (2) to the specific position using the
flywheel housing oil seal replacing tool (1).
SPECIAL TOOLS" at "GENERAL" section.)
(1) Flywheel Housing Oil Seal Replacing
Tool
(2) Oil Seal
(3) Flywheel Housing
Replacing Front Cover Oil Seal
1. Remove the used front cover oil seal (2).
2. Clean a new front cover oil seal (2) and apply engine oil to it.
3. Install the new oil seal (2) using the front cover oil seal replacing
tool (1). (Refer to "5. SPECIAL TOOLS" at "GENERAL" section.)
(1) Front Cover Oil Seal Replacing Tool
(2) Oil Seal
(3) Front Cover
S-108
ENGINE
(Refer to "5.
(a) 0 to 0.50 mm (0 to 0.019 in.)
(b) 1.0 mm (0.039 in.)
A : V2607-DI-E3B / V2607-DI-T-E3B
B : V3007-DI-T-E3B / V3307-DI-T-E3B
W1044329
A : 2.0 mm (0.079 in.)
W1044902
KiSC issued 06, 2020 A