Kubota WSM 07-E3B Series Workshop Manual page 145

07-E3B SERIES, WSM
Turbocharger Assembly and Exhaust Manifold
1. Remove the cover (1) and exhaust manifold mounting screws (3).
2. Take off the turbocharger assembly (4) with exhaust manifold (2).
3. Remove the oil pipe 1 (6) and oil pipe 2 (9). (If necessary)
4. Remove the exhaust port (5) and exhaust manifold (2). (If
necessary)
(When reassembling)
• Replace the gasket (8) with new one.
NOTE

• Be careful not to damage the O-ring (10).
Tightening torque Oil pipe 1 mounting screw
(1) Cover
(2) Exhaust Manifold
(3) Exhaust Manifold Mounting Screw
(4) Turbocharger Assembly
(5) Exhaust Port
S-42
ENGINE
16 to 19 N·m
1.6 to 2.0 kgf·m
12 to 14 lbf·ft
(6) Oil Pipe 1
(7) Oil Pipe Gasket
(8) Gasket
(9) Oil Pipe 2
(10) O-ring
W1078106
KiSC issued 06, 2020 A