Kubota WSM 07-E3B Series Workshop Manual page 58

07-E3B SERIES, WSM
Small End Bushing Replacing Tool (for V3007-DI-T-E3B / V3307-
DI-T-E3B)
Application : Use to press out and to press fit the small end bushing.
[Serial No. : 9E0001 and above ]
[Press out]
A 157 mm (6.181 in.)
B 14.0 mm (0.5512 in.)
C 120 mm (4.7244 in.)
D 27.4 mm dia. (1.0787 in. dia.)
E 30.95 mm dia. (1.2185 in. dia.)
F 20 mm dia. (0.7874 in. dia.)
6.3 m (250 in.)
a
6.3 m (250 in.)
b
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
[Press fit]
A 157 mm (6.181 in.)
B 14.0 mm (0.5512 in.)
C 120 mm (4.7244 in.)
D 27.4 mm dia. (1.0787 in. dia.)
E 42.000 mm dia. (1.6535 in. dia.)
F 20 mm dia. (0.7874 in. dia.)
6.3 m (250 in.)
a
6.3 m (250 in.)
b
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
Idle Gear Bushing Replacing Tool (for V2607 / V3007 / V3307)
Application: Use to press out and to press fit the bushing.
A 196 mm (7.72 in.)
B 25.0 mm (0.984 in.)
C 150 mm (5.91 in.)
D 34.5 mm dia. (1.36 in. dia.)
E 38.075 to 38.100 mm dia. (1.4991 to 1.5000 in. dia.)
F 20 mm dia. (0.79 in. dia.)
6.3 m (250 in.)
a
6.3 m (250 in.)
b
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
(1) Material : SS400
G-40
G GENERAL
W1040702
W1039429
KiSC issued 06, 2020 A