Kubota WSM 07-E3B Series Workshop Manual page 71

07-E3B SERIES, WSM
Fuel Control Rack Fixing Tool (for V2607-DI-E3B)
Application: Use to fix the fuel control rack of the injection pump.
1) Shaft
A 20.0 mm (0.787 in.)
B 6.0 mm (0.24 in.)
C 28.90 to 29.10 mm (1.138 to 1.145 in.)
D 2.0 to 3.0 mm (0.079 to 0.11 in.)
E M6 X P1.0
F 1.0 mm radius (0.039 in. radius)
G 0.50 mm radius (0.020 in. radius)
H 7.0 mm dia. (0.28 in. dia.)
I 13.0 mm (0.512 in.)
J 13.0 mm (0.512 in.)
C0.5 Chamfer 0.50 mm (0.020 in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
2) Flange
A 35.0 mm (1.38 in.)
B 34.0 mm (1.34 in.)
C 28.0 mm (1.10 in.)
D 27.64 mm (1.088 in.)
E 45.0 mm (1.77 in.)
F 20.5 mm (1.807 in.)
G 16.0 mm (0.630 in.)
H 4.5 mm (0.18 in.)
I 4.5 mm (0.18 in.)
J 7.0 mm dia. (0.28 in. dia.) through hole
K 6.5 mm dia. (0.26 in. dia.) through hole
L 3.2 mm (0.13 in.)
G-53
G GENERAL
W10398940
W10404690
KiSC issued 06, 2020 A