Kubota WSM 07-E3B Series Workshop Manual page 73

07-E3B SERIES, WSM
Jig for Governor Connecting Rod (for V2607 / V3007 / V3307)
Application: Use for connecting the governor connecting rod to the rack pin of the fuel injection pump assembly.
A 0.50 mm (0.020 in.)
B 12.7 to 13.0 mm (0.500 to 0.511 in.)
C 8.70 to 9.00 mm (0.343 to 0.354 in.)
D 39.0 mm (1.54 in.)
E 10.0 mm (0.394 in.)
F 7.0 mm (0.28 in.)
G 6.0 mm (0.24 in.)
H 80.0 mm (3.15 in.)
I 27.95 to 28.05 mm (1.101 to 1.104 in.)
J 5.0 mm (0.20 in.)
3.000 to 3.010 mm dia., 6.0 mm depth (0.1182 to 0.1185
K
in. dia., 0.24 in. depth)
L 9.0 mm (0.35 in.)
M 5.0 mm (0.20 in.)
N 14.45 to 14.55 mm (0.5689 to 0.5728 in.)
(1) Material : S43C-D (2) Permanent Magnet :
8.0 mm dia. (0.31 in. dia.)
Thickness : 3.0 mm (0.12 in.)
O 5.0 mm (0.20 in.)
P 4.0 mm (0.16 in.)
Q 2.955 to 2.965 mm dia. (0.1164 to 0.1167 in. dia.)
R 3.020 to 3.030 mm dia. (0.1189 to 0.1192 in. dia.)
S Ra = 1.6 a
AA Governor housing side
BB Press in side
a 0.60 mm radius (0.024 in. radius)
b 1.0 mm radius (0.039 in. radius)
C0.2 Chamfer 0.20 mm (0.0079 in.)
C0.4 Chamfer 0.40 mm (0.016 in.)
C0.5 Chamfer 0.50 mm (0.020 in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
(3) Pin Material : SUM22
G-55
G GENERAL
KiSC issued 06, 2020 A