Kubota WSM 07-E3B Series Workshop Manual page 162

07-E3B SERIES, WSM
Governor Lever
1. Remove the spring pin (3).
2. Remove the speed control lever (2) and the return spring (1).
3. Remove the governor lever assembly (4) from the governor
housing.
4. Remove the start spring (6).
(1) Return Spring
(2) Speed Control Lever
(3) Spring Pin
Stop Lever
1. Remove the spring pin (3).
2. Remove the stop lever (2) and the return spring (1).
3. Remove the stop lever shaft (4).
(1) Return Spring
(2) Stop Lever
(3) Spring Pin
S-59
ENGINE
(4) Governor Lever Assembly
(5) O-ring
(6) Start Spring
W1142375
(4) Stop Lever Shaft
(5) O-ring
W1143531
KiSC issued 06, 2020 A