Kubota WSM 07-E3B Series Workshop Manual page 69

07-E3B SERIES, WSM
Flywheel Housing Guide (for V2607-DI-E3B / V2607-DI-T-E3B)
Application: Use to install the flywheel housing to the crankcase.
Crankcase Aligning Plate (for V3007-DI-T-E3B / V3307-DI-T-
E3B)
Application: Use for aligning the crankcase 1 and 2.
A 126.6 mm (4.984 in.)
B 49.1 mm (1.93 in.)
C 37.5 mm (1.48 in.)
D 20 mm (0.79 in.)
E 14 mm dia. (0.55 in. dia.)
F 14 mm dia. (0.55 in. dia.)
G 14 mm dia. (0.55 in. dia.)
H 17.5 mm (0.689 in.)
I 17.5 mm (0.689 in.)
J 35 mm (1.4 in.)
K 19 mm (0.75 in.)
(1) Material : S43C
G-51
A 70.0 mm (2.76 in.)
B 30.0 mm (1.18 in.)
C 30.0 mm (1.18 in.) : Roulette
D 8.0 mm (0.31 in.)
78.60 to 78.70 mm dia.
E
(3.095 to 3.098 in. dia.)
73.8 to 74.2 mm dia.
F
(2.91 to 2.92 in. dia.)
32.009 to 32.034 mm dia.
G
(1.2602 to 1.2611 in. dia.)
H 20.0 mm dia. (0.787 in. dia.)
I 30.0 mm dia. (1.18 in. dia.)
J 75.5 mm dia. (2.97 in. dia.)
K 30.0 mm (1.18 in.)
7.0 mm dia., 8.0 mm depth
L
(0.28 in. dia., 0.31 in. depth)
M 1.1 to 1.3 mm (0.044 to 0.051 in.)
N 20.0 mm (0.787 in.)
a Ra = 3.2 a
b Ra = 1.6 a
c 0.40 mm radius (0.016 in. radius)
d 0.80 mm radius (0.031 in. radius)
e 0.20 mm radius (0.0079 in. radius)
f 1.5 mm radius (0.059 in. radius)
C0.5 Chamfer 0.50 mm (0.020 in.)
C1 Chamfer 1.0 mm (0.039 in.)
(1) Material : SS400
KiSC issued 06, 2020 A
G GENERAL
W1047882
W1046882