Kubota WSM 07-E3B Series Workshop Manual page 53

07-E3B SERIES, WSM
Small End Bushing Replacing Tool (for V2607-DI-E3B / V2607-
DI-T-E3B)
Application: Use to press fit the small end bushing.
A 140 mm (5.51 in.)
B 27.2 to 27.5 mm (1.07 to 1.08 in.)
C 75.0 mm (2.95 in.) : Roulette
D 20.0 mm (0.787 in.)
E 0.52 rad (30 °)
F 25.967 to 25.980 mm dia. (1.0224 to 1.0228 in. dia.)
G 34.0 mm dia. (1.34 in. dia.)
H 2.0 mm (0.079 in.)
I 0.35 rad (20 °)
J 2.5 mm (0.098 in.)
K 0.15 to 0.25 mm (0.0059 to 0.0098 in.)
L 0.35 rad (20 °)
M 1.0 mm (0.039 in.)
N 14.5 mm (0.571 in.)
O 1.0 mm (0.039 in.)
P 0.35 rad (20 °)
Q 26.000 to 26.021 mm (1.0237 to 1.0244 in.)
R 28.900 to 28.950 mm (1.1378 to 1.1397 in.)
a Ra = 3.2a
b Ra = 1.6a
c 1.0 mm radius (0.039 in radius)
d 0.40 mm radius (0.016 in. radius)
C0.3 Chamfer 0.30 mm (0.012 in.)
C0.5 Chamfer 0.50 mm (0.020 in.)
C1 Chamfer 1.0 mm (0.039 in.)
(1) Shaft Material : SS400
(2) Guide Material : STKM12A
G-35
G GENERAL
W1038743
KiSC issued 06, 2020 A