Kubota WSM 07-E3B Series Workshop Manual page 80

07-E3B SERIES, WSM
Balancer Shaft 2 Bearing D Replacing Tool (for V3007 / V3307 Balancer Model)
Application: Use to press fit the bearing.
A 34.5 mm dia. (1.36 in. dia.)
B 30.80 to 30.90 mm dia. (1.213 to 1.216 in. dia.)
C 24.0 mm dia. (0.945 in. dia.)
D 0.52 rad (30 °)
E 0.52 rad (30 °)
F 26.0 mm dia. (1.02 in. dia.)
G 46.0 mm dia. (1.81 in. dia.)
H 34.90 to 35.00 mm dia. (1.374 to 1.377 in. dia.)
4.000 to 4.018 mm dia., 7.0 mm depth
I
(0.1575 to 0.1581 in. dia., 0.28 in. depth)
J 1.2 mm (0.047 in.)
K 5.0 mm (0.20 in.)
L 1.5 mm (0.059 in.)
M 8.0 mm (0.31 in.)
N 15.0 mm (0.591 in.)
O 20.0 mm (0.787 in.)
P 99.0 mm (3.90 in.)
Q 29.5 mm (1.16 in.)
R 24.5 mm (0.965 in.)
S 424.5 to 425.5 mm (16.72 to 16.75 in.)
(1) Shaft Material : S43C-D (2) Stopper Material : SS400
T 120 mm (4.72 in.)
U 479 mm (18.9 in.)
V 1.6 rad (92 °)
W 35.0 mm dia. (1.38 in. dia.)
X 9.0 mm (0.35 in.)
Y 0.52 rad (30 °)
Z 84.5 to 85.5 mm (3.33 to 3.36 in.)
a 50.0 mm (1.97 in.)
b 0.70 rad (40 °)
c 2.0 mm (0.079 in.)
d 3.0 mm (0.12 in.)
e 2.0 mm radius (0.079 in. radius)
f Ra = 3.2 a
g 0.30 mm radius (0.012 in. radius)
h 0.80 mm radius (0.031 in. radius)
i 8.0 mm radius (0.31 in. radius)
j 0.40 mm radius (0.016 in. radius)
C0.5 Chamfer 0.50 mm (0.020 in.)
C1 Chamfer 1.0 mm (0.039 in.)
G-62
G GENERAL
KiSC issued 06, 2020 A