Kubota WSM 07-E3B Series Workshop Manual page 78

07-E3B SERIES, WSM
Balancer Shaft 2 Bearing B Replacing Tool (for V3007 / V3307 Balancer Model)
Application: Use to press fit the bearing.
A 18.0 mm (0.709 in.)
B 125 mm (4.92 in.)
C 1.2 mm (0.047 in.)
4.000 to 4.018 mm dia., 7.0 mm depth
D
(0.1575 to 0.1581 in. dia., 0.28 in. depth)
E 53.0 mm dia. (2.09 in. dia.)
F 48.80 to 48.90 mm dia. (1.922 to 1.925 in. dia.)
G 40.0 mm dia. (1.57 in. dia.)
H 0.52 rad (30 °)
I 1.5 mm (0.059 in.)
J 20.0 mm dia. (0.787 in. dia.)
K 34.90 to 35.00 mm dia. (1.374 to 1.377 in. dia.)
L 19.5 to 20.5 mm dia. (0.768 to 0.807 in. dia.)
M 20.0 mm (0.787 in.)
N 99.0 mm (3.90 in.)
O 44.0 mm (1.73 in.)
P 120 mm (4.72 in.)
(1) Shaft Material : S43C-D (2) Stopper Material : SS400
Q 0.52 rad (30 °)
R 35.0 mm dia. (1.38 in. dia.)
S 9.0 mm (0.35 in.)
T 0.52 rad (30 °)
U 84.5 to 85.5 mm (3.33 to 3.36 in.)
V 50.0 mm (1.97 in.)
W 0.70 rad (40 °)
X 2.0 mm (0.079 in.)
Y 3.0 mm (0.12 in.)
a 0.80 mm radius (0.031 in. radius)
b Ra = 3.2 a
c 0.20 mm radius (0.0079 in. radius)
d 8.0 mm radius (0.31 in. radius)
e 0.40 mm radius (0.016 in. radius)
C0.5 Chamfer 0.50 mm (0.020 in.)
C1 Chamfer 1.0 mm (0.039 in.)
G-60
G GENERAL
KiSC issued 06, 2020 A