Kubota WSM 07-E3B Series Workshop Manual page 197

07-E3B SERIES, WSM
Cam Height
1. Measure the height of the cam (2) at its highest point with an
outside micrometer.
2. If the measurement is less than the allowable limit, replace the
camshaft (1).
V2607-DI-E3B
Intake cam height V2607-DI-T-E3B
V3007-DI-T-E3B
V3307-DI-T-E3B
V2607-DI-E3B
Exhaust cam
V2607-DI-T-E3B
height
V3007-DI-T-E3B
V3307-DI-T-E3B
(1) Camshaft
S-94
ENGINE
Factory 32.70 mm
spec. 1.287 in.
Allowable 32.20 mm
limit 1.268 in.
Factory 32.60 mm
spec. 1.283 in.
Allowable 32.10 mm
limit 1.264 in.
Factory 37.50 mm
spec. 1.476 in.
Allowable 37.00 mm
limit 1.457 in.
Factory 33.20 mm
spec. 1.307 in.
Allowable 32.70 mm
limit 1.287 in.
Factory 33.00 mm
spec. 1.299 in.
Allowable 32.50 mm
limit 1.280 in.
Factory 37.90 mm
spec. 1.492 in.
Allowable 37.40 mm
limit 1.472 in.
(2) Cam
W1064551
KiSC issued 06, 2020 A