Kubota WSM 07-E3B Series Workshop Manual page 149

07-E3B SERIES, WSM
Nozzle Holder
1. Remove the overflow pipe (1).
2. Remove the nozzle holder clamps (2), nozzle holder assembly
(3) and nozzle gaskets.
(When reassembling)
• Be sure to place the nozzle gaskets and the O-rings (4).
Nozzle holder clamp screw
Tightening torque
Overflow pipe assembly
retaining screw
(1) Overflow Pipe
(2) Nozzle Holder Clamp
S-46
ENGINE
24 to 27 N·m
2.4 to 2.8 kgf·m
18 to 20 lbf·ft
9.81 to 11.2 N·m
1.00 to 1.15 kgf·m
7.24 to 8.31 lbf·ft
(3) Nozzle Holder Assembly
(4) O-ring
W1049737
KiSC issued 06, 2020 A