Kubota WSM 07-E3B Series Workshop Manual page 79

07-E3B SERIES, WSM
Balancer Shaft 2 Bearing C Replacing Tool (for V3007 / V3307 Balancer Model)
Application: Use to press fit the bearing.
A 52.5 mm dia. (2.07 in. dia.)
B 48.30 to 48.40 mm dia. (1.902 to 1.905 in. dia.)
C 40.0 mm dia. (1.57 in. dia.)
D 0.52 rad (30 °)
E 1.5 mm (0.059 in.)
F 18.0 mm (0.709 in.)
G 1.2 mm (0.047 in.)
4.000 to 4.018 mm dia., 7.0 mm depth
H
(0.1575 to 0.1581 in. dia., 0.28 in. depth)
I 20.0 mm dia. (0.787 in. dia.)
J 46.0 mm dia. (1.81 in. dia.)
K 34.90 to 35.00 mm dia. (1.374 to 1.378 in. dia.)
L 8.0 mm (0.31 in.)
M 199.5 mm (7.854 in.)
N 15.0 mm (0.591 in.)
O 100 mm (3.94 in.)
P 6.0 mm (0.24 in.)
Q 25.0 mm (0.984 in.)
R 222 to 223 mm (8.74 to 8.77 in.)
S 120 mm (4.72 in.)
T 0.70 rad (40 °)
U 35.0 mm dia. (1.38 in. dia.)
(1) Shaft Material : S43C-D (2) Stopper Material : SS400
V 9.0 mm (0.35 in.)
W 84.5 to 85.5 mm (3.33 to 3.36 in.)
X 0.35 rad (20 °)
Y 14.54 mm (0.5724 in.)
Z 39.94 mm (1.572 in.)
a 50.0 mm (1.97 in.)
b 0.87 rad (50 °)
c 18.0 mm (0.709 in.)
d 4.0 mm (0.16 in.)
e 12.0 mm (0.472 in.)
f 15.0 mm (0.591 in.)
g 0.70 rad (40 °)
h 3.0 mm (0.12 in.)
i 2.0 mm (0.079 in.)
j Ra = 3.2 a
l 0.20 mm radius (0.0079 in. radius)
k 0.80 mm radius (0.031 in. radius)
m 8.0 mm radius (0.31 in. radius)
n 0.40 mm radius (0.016 in. radius)
C0.5 Chamfer 0.50 mm (0.020 in.)
C1 Chamfer 1.0 mm (0.039 in.)
G-61
G GENERAL
KiSC issued 06, 2020 A