Chapter 2 Front Panel Operations
To Select Basic Waveform
DG2000 can output 5 basic waveforms, including Sine, Square, Ramp, Pulse and
Noise. Press the Shift key and its backlight turns on. Then press Home/Menu on
the front panel, then tap the touch screen to select the desired waveform. You can
also press the waveform function key on the front panel to directly select the desired
waveform. After selecting the desired waveform, you are automatically directed to
the waveform parameter setting interface. To go back to the waveform selection
interface, tap to slide right or press the Home/Menu key on the front panel. At
start-up, Sine is selected by default.
Table 2-1 Basic Waveforms
Basic Waveforms
Function Name
Freq/Period
Ampl/HighL
Offset/LowL
Start Phase
Align Phase
Duty
Symmetry
Width/Duty
RisEdge
FallEdge
DG2000 User Guide
Sine
Square
Sine
Square
√
√
√
√
√
√
√
√
√
√
√
Ramp
Pulse
Ramp
Pulse
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
RIGOL
Noise
Noise
√
√
2-3