Chapter 2 Front Panel Operations
RIGOL
Figure 2-11 N Cycle Burst
For N cycle burst, "Internal", "External", or "Manual" trigger source could be selected.
Besides, you can also set the parameters of "Period" (internal trigger), "Delay",
"Trig In" (external trigger) and "Trig Out" (internal and manual trigger).
Infinite Burst
In Infinite mode, the cycle number of the waveform is set as an infinite value. The
generator outputs a continuous waveform after receiving a trigger signal.
When the Shift key is illuminated, press Home/Menu → Burst → "Infinite" to
enable the Infinite burst. The instrument will set the trigger source to "Manual"
automatically. A diagram of an infinite cycle burst will appear on the screen.
Figure 2-12 Infinite Burst
For the Infinite burst, "External" or "Manual" trigger source could be selected.
Besides, users can set the parameters of "Delay", "Trig In" (external trigger), and
"Trig Out" (manual trigger).
2-64
DG2000 User Guide