Rigol DG2052 User Manual page 20

RIGOL
move the cursor down (clockwise) or up (counterclockwise).
— It can be used to increase (clockwise) or decrease (counterclockwise) the
value marked by the cursor when you use the knob to set the parameters
(pressing down the knob can enter the editing mode). Press down the knob
again to exit the editing mode.
— It can be used to select the desired waveform by moving the cursor with the
knob when you select the waveform (pressing the right arrow key will locate
the cursor to the right of the interface). Press down the knob to select the
desired waveform.
— When you store or read a file, it can be used to select a storage location or
select a file to be read. Press down the knob to unfold the currently selected
directory.
— It can be used to select the desired parameter by moving the cursor with
the knob when you set the common information (pressing the right arrow
key will locate the cursor to the right of the interface). Press down the knob
to select the desired parameter. Then, rotate the knob to modify the
parameter, and press it down again to confirm your modification.
— It is used to select the desired configuration type in the Preset interface.
Press down the knob to confirm your selection. At this time, a dialog box is
displayed. Use the knob to select the corresponding button, then press
down the knob to perform the corresponding operation (note that only
when the button turns green, can your operation on the knob be valid).
11. Shift Key
Used to switch over the functions of the two different function keys.
— When the backlight of the Shift key is not illuminated, the function keys on
the front panel exercise their default functions as what indicated on the key
surface.
— When you press down the Shift key, its backlight is illuminated. At this point,
pressing any function key on the front panel performs the function as what
indicated below the key (function name as what the silk screen printing label
indicates under the function key).
For example, for the
pressing the
Shift key is illuminated, pressing the
function.
12. Home/Menu Key
Home Enters the main interface of the instrument.
Menu Enters the waveform mode selection interface.
13. Function Keys
1-6
key, when the Shift key is not illuminated,
key will set the current output to Sine wave; when the
Chapter 1 Quick Guide
key will perform the Preset
DG2000 User Guide