Rigol DG2052 User Manual page 125

Function/arbitrary waveform generator
Hide thumbs Also See for DG2052:
Table of Contents

Advertisement

Chapter 2 Front Panel Operations
To Set the Subnet Mask
In ManualIP mode, the subnet mask can be manually set.
The format of the subnet mask is nnn.nnn.nnn.nnn. Wherein, the range of "nnn"
is from 0 to 255. You are recommended to ask your network administrator for a
subnet mask available.
Tap the Sub parameter input field in the LAN setting interface, and then input a
desired subnet mask by using the numeric keypad. The setting is stored in
non-volatile memory and will be automatically loaded when the generator is
powered on the next time if DHCP and AutoIP are set as "Off".
To Set Default Gateway
In ManualIP mode, the default gateway can be manually set.
The format of the default gateway is "nnn.nnn.nnn.nnn". The range for the first
segment (nnn) is from 1 to 223 (except 127); and the range for the other three
segments is from 0 to 255. You are recommended to ask your network
administrator for a gate address available.
Tap the Gate parameter input field in the LAN setting interface, and then input a
desired gateway address by using the numeric keypad. The setting is stored in
non-volatile memory and will be automatically loaded when the generator is
powered on the next time if DHCP and AutoIP are set to "Off".
To Set DNS
In ManualIP mode, the DNS can be manually set.
The format of the DNS address is "nnn.nnn.nnn.nnn". The range for the first
segment (nnn) of the address is from 1 to 223 (except 127); and the range for
the other three segments is from 0 to 255. You are recommended to ask your
network administrator for an address available.
Tap the DNS parameter input field in the LAN setting interface, and then input a
desired address by using the numeric keypad, the arrow keys, and the knob.
The setting is stored in the non-volatile memory and will be automatically loaded
when the generator is powered on the next time if DHCP and AutoIP are set to
"Off".
Default Settings
Tap Default to restore the network parameters to the default settings. By default,
DHCP and AutoIP are enabled and ManualIP is disabled.
DG2000 User Guide
RIGOL
2-95

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dg2000 seriesDg2072Dg2102

Table of Contents