Table of Contents
Advertisement
RIGOL
Common Settings
When the Shift key is illuminated, press Pulse/Utility on the front panel or tap the
icon in the information setting area at the lower-right corner of the user interface
to open the following operation interface. The interface displays the system
parameters of the currently selected channel.
System Setting
To Set the System Language
At present, DG2000 supports menus in multiple languages. Both Chinese and English
are available for the display of the help information, prompt messages, and interface
display. Chinese and English input methods are also supported.
When the Shift key is illuminated, press Pulse/Utility → System Setting →
Language to select the desired language. This setting is stored in non-volatile
memory and will not be affected by the "restore to defaults" operation.
Power-on
Selects "Default" or "Last" as the power-on system state. The default setting is
"Default".
Last: includes all system parameters and states, except channel output state
⚫
and clock source.
Default: denotes the factory defaults except certain parameters (e.g.
⚫
Language).
When the Shift key is illuminated, press Pulse/Utility → System Setting →
Power-on to select the desired configuration type. This setting is stored in
non-volatile memory and will not be affected by the "restore to defaults" operation.
2-90
Figure 2-25 Utility Interface
Chapter 2 Front Panel Operations
DG2000 User Guide
Advertisement
Table of Contents
