Snm-Snmp Configuration - Christie Mirage SST Technical Reference

($SIN 3)
Try to select an unavailable input because there is only one TDPIC in the projector:
(SIN+PORT 4)
Result:
($SIN 1)
SNM–SNMP Configuration
Configures SNMP support for the projector.
Commands
Command
SNM+POWR <0 | 1>
SNM+READ "<password>"
SNM+SIGN <0 | 1>
SNM+STAL <0 | 1>
SNM+TIP1 "<IP address>"
SNM+TIP2 "<IP address>"
SNM+TIP3 "<IP address>"
SNM+THRM <0 | 1>
Examples
Set the SNMP read community name to public:
(SNM+READ "public")
Configure one of the client IPs to receive traps:
(SNM+TIP1 "192.168.1.25")
Disable power state traps:
(SNM+POWR 0)
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Description
Enables or disables power state
changes. (Saved value)
Sets the password for SNMP
notifications. (Saved value)
Enables or disables video signal
changes. (Saved value)
Enables or disables fan/cooling
faults. (Saved value)
Sets up to three IP addresses for
traps to be sent. (Saved value)
Enables or disables temperature
faults. (Saved value)
Serial API commands
Values
0 = Disables power state changes
1 = Enables power state changes (Default)
password = String value, maximum 32
characters
Default password = private
0 = Disables video signal changes
1 = Enables video signal changes (Default)
0 = Disables fan/cooling faults
1 = Enables fan/cooling faults (Default)
IP address = String value
0.0.0.0 disables notifications (Default)
0 = Disables temperature faults
1 = Enables temperature faults (Default)
54