Page 1
• Use all mounting points, including the safety point, when installing the product overhead. Installing the Mirage SST Rigging Frame Adapter Plate Instruction Sheet 020-103164-02 Rev. 1 (08-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
1. Ensure the projector is in a secure position. You can set the projector on a table in portrait orientation with the user interface facing up. Christie does not recommend having the projector overhang when removing the feet, unless the projector is securely positioned.
Page 3
1. Position the projector with the adapter plate onto the rigging frame base plate. Ensure that the marked side on the adapter plate is towards the pitch adjuster. Installing the Mirage SST Rigging Frame Adapter Plate Instruction Sheet 020-103164-02 Rev. 1 (08-2019) Copyright 2019 Christie Digital Systems USA, Inc.
Page 4
4. Install two screws with the flat washer (supplied with the frame), lock washer and nut (supplied with the adapter plate) as per required configuration. Torque to 34 Nm. Installing the Mirage SST Rigging Frame Adapter Plate Instruction Sheet 020-103164-02 Rev. 1 (08-2019) Copyright 2019 Christie Digital Systems USA, Inc.
Europe, Middle East, and Africa: +44 (0) 1189 778111 or Support.EMEA@christiedigital.com • Asia Pacific: +65 6877-8737 or Support.APAC@christiedigital.com Installing the Mirage SST Rigging Frame Adapter Plate Instruction Sheet 020-103164-02 Rev. 1 (08-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.