Command
Description
delay differs for each of the various channel configurations. (Read-
only)
FRD+TIME?
Returns a string representation of the actual frame delay, in
milliseconds. If 3D processing is used, the left and right eye delay
may be different from each other and each delay is reported
individually. (Read-only)
Note: This representation in milliseconds is approximate and is for
reference only.
Examples
Query the actual frame delay:
(FRD+STAT?)
Result:
(FRD+STAT!1250)
Query the actual frame delay, in microseconds:
(FRD+TIME?)
Result:
(FRD+TIME!"33.33")
Set the frame delay to 2.25 frames:
(FRD 2250)
Set the frame delay to 1.1 frames:
(FRD 1100)
Mirage examples
Query the actual frame delay:
(FRD+STAT?)
Result:
(FRD+STAT!1250)
Query the actual frame delay, in microseconds:
(FRD+TIME?)
Result:
(FRD+TIME!"33.33")
Query the actual frame delay for a Dual-Input 3D configuration, in microseconds:
(FRD+TIME?)
Result:
(FRD+TIME!"33.33 (L), 41.67 (R)")
Set the frame delay to 1.1 frames:
(FRD 1100)
Set the frame delay to 2.25 frames:
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
35