Tdm-3D Mode - Christie Mirage SST Technical Reference

Examples
Return the 3D emitter delay value on main video:
(TDD?)
Set 3D emitter delay to 20.00 milliseconds on main video:
(TDD 2000)
TDM–3D Mode
Controls when input signals are processed as 3D or not.
Commands
Command Description
TDM <mode> Controls when input signals are processed
as 3D or not. (Saved value)
Examples
Turn off 3D processing for direct input signals:
(TDM 0)
Automatically determine whether to enable 3D processing or not:
(TDM 1)
Configure the projector to enable 3D processing where possible:
(TDM 2)
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 = Turns off 3D processing for direct input
signals. Has no effect when a Dual Input 3D
port configuration is selected. Useful for
displaying 2D 120Hz signal. It prevents a
Missing External 3D Synch
event from occurring.
SPC-2145
1 = Automatically determines whether to
enable 3D processing or not. When input
signals are 60Hz or less, no frame doubling
or tripling occurs unless a Dual Input 3D
channel is selected. (Default)
2 = Configures the projector to enable 3D
processing where possible. Frame doubling
occurs when input signals are 60Hz. Frame
tripling occurs when input signals are
48-50Hz.
58