Enable Time Correlation Between The Timing And State Analyzers - HP 1660 Series Training Manual

Mixed Mode - Correlation of State and Timing Data

Enable Time Correlation between the Timing and State Analyzers

Enable Time Correlation between the Timing and
State Analyzers
Setting the Count to Time causes the state analyzer to store a time value,
called a time stamp, for each data point that is stored in memory. When the
mixed display is selected, the time stamp information is used to display the
data in both the timing and state displays with the proper time relationship
(correlation).
Highlight the
1
In the pop-up menu, highlight the field to the right of
2
the
Select
Highlight
3
Press the
Data stored before triggering has negative time numbers, and data stored
after triggering has positive time numbers.
The Count field
accesses a selection
menu which indicates
whether acquisition
data is stamped with
a Time tag or a State
Count tag.
Count Time places time
tags on all displayed
data.
Enabling Time Correlation between the Timing and State Analyzers
Result
The state analyzer is set to store a time stamp for each state that is recorded.
A time stamp does not have to be set for the timing analyzer because the
timing analyzer automatically keeps track of time.
5-8
Count Off field, and press the
key.
in the next pop-up menu, and press the
Time
key to close the Count pop-up menu.
Done
Get other manuals https://www.bkmanuals.com
Select key.
Count , and press
key.
Select