Introduction to Inverse Assembly
Filter the Captured Data
Filter the Captured Data
Note
This exercise can only be done with the HP 1660C, HP 1660CS,
HP 1661C, or the HP 1661CS analyzer.
If the program you are running is large or you are not interested in looking at
all of the code, you can suppress the types of instructions you are not
interested in. In this exercise you will look at the general flow of the code by
showing only the jumps and suppressing all other types of instructions.
Highlight the
1
Suppress all of the instruction types, except "Jumps:", by highlighting
2
each field and pressing the
Press the
3
Use the knob to scroll through the listing of jumps.
4
Filtering the Captured Data
Result
The captured data can be filtered in various ways. In this exercise, the
inverse assembly code is filtered so that only the jump instructions are
displayed.
10-6
field and press the
Invasm Options
Select
key to close the Inverse Assembly Options pop-up.
Done
Get other manuals https://www.bkmanuals.com
key.
Select
key.