Table of Contents
Advertisement
Set Up the State Trigger Specification
When comparing two state listings, it is best to only sample the data you are
interested in comparing. This will ensure that the errors you find are errors in
the data you are interested in, rather than in the pretrigger data. Setting the
analyzer to store "no state" before the trigger, tells the analyzer to begin
capturing data after the trigger is found.
If the Trigger Menu is not already displayed, press the
1
key.
Highlight the
2
Select
Highlight the field to the right of
3
Highlight
Highlight the field to the right of
4
Highlight
Done
Highlight the
5
Select
Highlight the field to the right of
6
Highlight
the
Done
Result
The trigger specification is now:
•
Level 1 - While storing "no state", trigger on "a" 1 time
•
Level 2 - Store "any state"
field in the State Sequence Levels box, and press the
1
key.
no state
in the pop-up menu, and press the
a
in the pop-up menu, and press the
key to close the Sequence Level 1 pop-up menu.
field in the State Sequence Levels box, and press the
2
key.
anystate
in the pop-up menu, and press the
key to close the Sequence Level 2 pop-up menu.
Get other manuals https://www.bkmanuals.com
Comparing State Traces
Set Up the State Trigger Specification
Trigger
While storing
, and press the
Select
, and press the
Trigger on
Select
Select
key. Press the
, and press the
Store
Select
Select
MENU
Select
key.
key.
key.
key.
key. Press
4-5
Advertisement
Table of Contents
