Hp E1725C And Hp E1740A Time Interval Analyzers With The Hp E1742A/43A/44A/46A/48A Analysis Software - HP E1725C Getting Started Manual

Time interval analyzers with the hp e1742a/43a/44a/46a/48a analysis software
Hide thumbs Also See for E1725C:
Table of Contents

Advertisement

Chapter 1 How to Begin
HP E1725C and HP E1740A Time Interval Analyzers with the
HP E1742A/43A/44A/46A/48A Analysis Software
HP E1725C and HP E1740A
Time Interval Analyzers with the
HP E1742A/43A/44A/46A/48A
Analysis Software
The HP E1725C TIA is a stand-alone instrument. Connect the pieces as
described below and apply power. Skip the steps that do not apply.
The TIA is then ready to start measuring.
The HP E1742A/43A/44A/46A/48A are options to the HP E1725C
(option 242, 243, 244, 246 and 248, respectively). These software packages
are Microsoft Windows applications, which serve as the user interface and
analysis portion of the TIA. At least one of these packages must be
included with the HP E1725C.
This guide describes how to assemble the TIA and start using it. If you are
assembling the HP E1725C for the first time, reassembling it after some
time, or building the TIA using other computers or VXI mainframes, this
procedure will help.
The standard HP E1725C TIA instrument consists of the following items:
HP E1740A Time Interval Analyzer (two-slot, C-size VXI module)
HP E1406A Slot-0 Command Module (one-slot, C-size VXI module)
HP E1742A/43A/44A/46A/48A Analysis Software
HP Omnibook 5700 CTX Laptop Computer
Six-slot VXI C-size mainframe
National Instruments PCMCIA-GPIB Kit (includes a PCMCIA card
and a GPIB cable)
DOS and Windows software
Four oscilloscope probes (three 10:1 and one 1:1)
Blank panels for covering unused VXI mainframe slots
1-4
Getting Started Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

E1740a

Table of Contents