Triggering the Oscilloscope with the Timing Analyzer
Capture the Glitch with the Timing Analyzer and Oscilloscope
Capture the Glitch with the Timing Analyzer and
Oscilloscope
The timing analyzer runs, triggers, and then arms the oscilloscope. Notice
the slight delay between the glitch displayed by the timing analyzer and the
oscilloscope. This is caused by the intermodule bus when one instrument
arms another. In the following exercise, you will align the glitch in the two
displays.
Highlight the
1
in the pop-up menu, and press the
Highlight the
2
20 ns.
You will now see the glitch on both the oscilloscope waveform, and on
TCOUNT 7 in the timing analyzer section of the display.
The glitch captured by
the timing analyzer.
The glitch captured by
the oscilloscope.
Capturing the Glitch on the Oscilloscope
Result
The glitch is captured and displayed by the analyzer and oscilloscope.
8-14
Group Run
field, and press the
field, then rotate the knob to change the s/Div to
s/Div
Get other manuals https://www.bkmanuals.com
Select
key. Highlight
key.
Select
Single