Table of Contents
Advertisement
Clear the Timing Analyzer Trigger
Clearing the timing analyzer trigger sets the specification to "don't care". By
doing this, the timing analyzer will trigger as soon as it is armed by the state
analyzer.
Press the
1
Highlight the
2
press the
Highlight the
3
from the pop-up menu.
Result
The timing analyzer trigger specification is set to a "don't care" state.
Set Up the State Trigger Specification
Press the
1
menu, and press the
now displayed. If this is not the case, press the
again, then choose
Highlight the
2
menu. Press the
Highlight the field to the right of
3
Highlight
Press the
4
Result
The state analyzer trigger specification is now:
The trigger term "a" is assigned the hex value FF.
Mixed Mode - Correlation of State and Timing Data
Trigger
MENU key.
Modify Trigger
field on the right side of the screen, and
Select
key.
field, press the
Clear Trigger
MENU key. Highlight
Trigger
key. The Trigger MACHINE 1 menu is
Select
Trigger MACHINE 1
field in the State Sequence Levels box of the Trigger
1
Select
key.
While storing
in the pop-up menu, and press the
anystate
key to close the Sequence Level 1 pop-up menu.
Done
Level 1 - While storing "anystate", TRIGGER on "a" 1 time
Level 2 - Store "anystate"
Get other manuals https://www.bkmanuals.com
Clear the Timing Analyzer Trigger
key, and choose
Select
in the pop-up
Trigger MACHINE 1
Trigger
MENU key
from the pop-up menu.
, and press the
Select
key.
Select
All
key.
5-7
Advertisement
Table of Contents
