Using the Oscilloscope
Delete Channel 2 from the Display
Delete Channel 2 from the Display
You can delete the unused channels to get more display space.
Highlight the bar on the left side of the waveform area.
1
Using the knob, place the cursor on the channel 2 designator (C2),
2
then press the
Select
3
This is channel 1 with the
waveform of the training
board clock signal
displayed.
This is channel 2, and it
does not contain data.
Therefore, this channel
can be deleted to allow
more display space for
channel 1.
Deleting Channel 2 from the Display
Result
The unused channel 2 is deleted from the display. The waveform for channel
1 occupies the entire display.
7-6
key.
Select
Delete
from the pop-up menu.
Get other manuals https://www.bkmanuals.com