Set Up The Pattern Generator Format Menu - HP 1660 Series Training Manual

Using the Pattern Generator

Set Up the Pattern Generator Format Menu

Set Up the Pattern Generator Format Menu
For the pattern generator to output the "walking ones" to the logic analyzer,
the lower four bits of Pod 4, which is connected to the training board through
the TTL Data Pod, must be assigned to PATGEN.
Highlight the
1 1
press the
If the Format Menu of the Pattern Generator is now displayed, go to
2
step 4.
Press the
3
Highlight
4
Label
Type PATGEN, and Press the
5
Highlight the field showing the Pod B4 to the right of PATGEN, and
6
press the
The lower 4 bits of
Pod B4 are assigned to
output the "walking
ones" .
Setting Up the Pattern Generator Format Menu
9-10
Analyzer field in the top-left corner of the screen, and
key. Highlight
Select
Format MENU key.
Lab1 below Label, and press the
in the pop-up menu, and press the
key.
Select
Get other manuals https://www.bkmanuals.com
, and press the
Patt Gen Select
Select key. Highlight
key.
Select
key.
Done
key.
Modify