Table of Contents
Advertisement
Introduction to State Analysis
Change a Label Name
Change a Label Name
Labels group channels together. You can rename a label to make it more
meaningful. For example, you could use the label name DATA for all of the
channels that are connected to the data bus of a microprocessor.
In this exercise, you will change Lab2 to SCOUNT to represent the state
count data. The label is named SCOUNT so that you can keep track of the
counter output acquired by the state analyzer.
Highlight the label
1
Type SCOUNT, then press the
2
Highlight the field labeled TCOUNT, and press the
3
Highlight
If you have already performed the Introduction to Timing Analysis exercises
in chapter 2, this field will be the TCOUNT label, which represents timing
count. Turning the label off now saves it for later use.
Changing a Label Name
Result
The label TCOUNT is turned off and Lab 2 is now named SCOUNT, which
represents state count.
3-6
below the
Lab2
Done
in the pop-up menu, and press the
Turn Label Off
Get other manuals https://www.bkmanuals.com
field.
Labels
key.
Select
key.
Select
key.
Advertisement
Table of Contents
