Set Up The Timing Trigger Specification - HP 1660 Series Training Manual

Set Up the Timing Trigger Specification

You will now tell the analyzer to trigger on the glitch the first time it occurs.
Highlight the
1
Select
Highlight the "
2
pop-up menu, and press the
Highlight the field next to
3
Highlight
Highlight the field next to
4
no state
Press the
5 5
The trigger term
"Edge1" is set for the
analyzer to look for
the glitch on bit 7.
Setting Up the Trigger Specification
Result
Your trigger specification now shows: Level 1 - TRIGGER on "Edge1" 1 time.
Triggering the Oscilloscope with the Timing Analyzer
field in the
1 Timing Sequence Levels
key.
> " field, and press the
Select
Trigger on
in the pop-up menu, and press the
Edge 1
Else on
in the pop-up menu, and press the
key to close the
Done
Get other manuals https://www.bkmanuals.com
Set Up the Timing Trigger Specification
box, and press the
Select key. Highlight
key.
, and press the
Select
Select
, and press the Select key. Highlight
key.
Select
pop-up menu.
Sequence Level 1
Occurs in the
key.
key.
8-11