Arm The Oscilloscope With The Timing Analyzer - HP 1660 Series Training Manual

Triggering the Oscilloscope with the Timing Analyzer

Arm the Oscilloscope with the Timing Analyzer

Arm the Oscilloscope with the Timing Analyzer
The timing analyzer and the oscilloscope can be configured so that the timing
analyzer's glitch triggering capability will capture the glitch, and then arm the
oscilloscope so that it, too, captures the glitch.
Highlight the
1
press the
Highlight the field under
2
Highlight
When you select the analyzer to arm the scope, the field under
Analyzer Arm In changes to Group Run
Press the
3
The timing analyzer
starts when Group
Run is initiated.
Arming the Oscilloscope with the Timing Analyzer
Result
The timing analyzer will look for the glitch, trigger, and then arm the scope,
which allows the scope to capture the glitch.
8-12
Arming Contro l field at the far right side of the screen, and
key.
Select
Scope Arm In
Analyzer in the pop-up menu, and press the
key to exit the Arming Control pop-up menu.
Done
Get other manuals https://www.bkmanuals.com
, and press the
Select
Select
.
The oscilloscope is
armed by the Timing
Analyzer.
key.
key.