Table of Contents
Advertisement
Trigger on the Term and Examine the Waveform
When you press the Run key, the analyzer triggers on the term you set up in
the previous exercise, captures the data, and then switches to the Waveform
menu where the data is displayed.
Press the
1
Use the table below to examine the waveform.
2
To Do This:
To scale the waveform
To scroll through the waveform
To measure a time interval
Hex value of waveform
at X-marker
Sec/Div (zoom)
Delay
Markers
Trig to X
Triggering on the Term and Examining the Waveform
Highlight the
3
Trigger on the Term and Examine the Waveform
Run
key.
Do This:
Highlight the
to zoom in and counter clockwise to zoom out. If you
zoom out enough you can view the entire acquisition
buffer.
Highlight the
direction to scroll through the data.
Highlight the
key. Choose
Trig to X
Markers Time
field. Press the
Get other manuals https://www.bkmanuals.com
Introduction to Timing Analysis
sec/Div
field, then turn the knob clockwise
Delay
field, then turn the knob in either
Markers Off
field, then press the
Time
from the pop-up menu. Highlight the
field, then turn the knob to move the X marker.
As you move the X-marker
past transitions on the
waveform, the hex value to
the right of X-> changes,
showing you the value of
the TCOUNT label at the
current X-marker position.
Select
key, then select
Select
Off
.
2-9
Advertisement
Table of Contents
