Using the Logic Analyzer
To access the Pattern Generator menus
To access the Pattern Generator menus
The Pattern Generator menus let you configure the pattern generator, build
test vector files, and use and create user macros.
Select the mode field.
1
A pop-up menu appears with the choices System, Analyzer, and Patt Gen. (If
you have installed any optional software, there may be other choices as well.
Select Patt Gen.
2
Select the menu field.
3
The menus for the pattern generator.
•
Patt Gen Sequence menu is used to build test vector files. There are two
sequences: an initialization sequence and a main sequence.
•
Patt Gen Format menu is used to configure the pattern generator with a
clock source and parameters, to generate a symbol table, to select its
output mode, to assign which vector output channels are used, and to
group and label the vector output channels.
•
Pat Gen User Macros menu is used to create new macros and to edit
existing macros.
3–8