Set Scheduled Tasks; Set Park Action - HIKVISION DS-2TD8166-150ZH2F/V2 User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
position if you need to select one point in the scene as the base point.
Steps
1. Go to Configuration → PTZ → Initial Position.
2. Move the device to the needed position by manually controlling the PTZ control buttons.
3. Click Set to save the information of initial position.
Call
Clear

9.8 Set Scheduled Tasks

You can set the device to perform a certain task during a certain period.
Steps
1. Go to Configuration → PTZ → Scheduled Tasks.
2. Check Enable Scheduled Task.
3. Select the task type and set the period. For setting the period, refer to Set Arming Schedule.
4. Repeat step 3 to set more than one scheduled tasks.
5. Set Park Time. During the set task period, if you operate the device manually, the scheduled
task will be suspended. When the manual operation is over, the device will continue to perform
the scheduled task after the set park time.
6. Click Save.
Note
If you want to clear all scheduled tasks, go to Configuration → PTZ → Clear Config, check Clear
All Scheduled Tasks, and click Save.

9.9 Set Park Action

You can set the device to perform an action (for example, preset or patrol) or return to a position
after a period of inactivity (park time).
Before You Start
Set the action type first. For example, if you want to select patrol as park action, you should set
the patrol. For setting patrols, refer to Set Patrol Scan.
Steps
1. Go to Configuration → PTZ → Park Action and check Enable Park Action.
2. Set Park Time, the inactive time before the device starts the park action.
3. Select Action Type according to your needs.
4. Click Save.
The device moves to the set initial position.
Clear the set initial position.
43