Set Park Action; Set One-Touch Park; Set Privacy Mask - HIKVISION DS-2DE2C200SCG-E User Manual

3.8 Set Park Action

You can set the device to perform an action (for example, preset or patrol) or return to a position
after a period of inactivity (park time).
Before You Start
Set the action type first. For example, if you want to select patrol as park action, you should set the
patrol. See Set Patrol Scan for details.
Steps
1. Go to Configuration → PTZ → Park Action .
2. Check Enable Park Action.
3. Set Park Time: the inactive time before the device starts park action.
4. Select Action Type according to your needs.
5. Select an Action Type ID, if you select patrol or preset as action type.
When the action type is patrol, action type ID stands for patrol No. When the action type is
preset, action type ID stands for preset No.
6. Click Save.

3.8.1 Set One-Touch Park

This function is used to start park instantly.
Steps
1. Refer to Set Park Action to set a park action.
2. Choose from the following methods to start one-touch park.
- Click .
- Call Preset No. 32.

3.9 Set Privacy Mask

Privacy masks cover certain areas on the live image to protect personal privacy from being live
viewed and recorded.
Steps
1. Go to Configuration → PTZ → Privacy Mask .
2. Adjust the live image to the target scene via PTZ control buttons.
3. Draw the area.
Draw Area
Stop Drawing
Network Speed Dome User Manual
Click Draw Area, and click on the live view
image to determine the boundary of the mask.
ClickStop Drawing after drawing the mask.
14