Set Park Action; Set One-Touch Park; Set Privacy Mask - HIKVISION DS-2DY7236IX-A User Manual

Network Speed Dome & Positioning System User Manual
Note
If you want to clear all scheduled tasks, go to Configuration → PTZ → Clear Config, check Clear
All Scheduled Tasks, and click Save.

4.8 Set Park Action

You can set the device to perform an action (for example, preset or patrol) or return to a position
after a period of inactivity (park time).
Before You Start
Set the action type first. For example, if you want to select patrol as park action, you should set
the patrol. See Set Patrol Scan for details.
Steps
1. Go to Configuration → PTZ → Park Action.
2. Check Enable Park Action.
3. Set Park Time: the inactive time before the device starts park action.
4. Select Action Type according to your needs.
5. Select an Action Type ID, if you select patrol or preset as action type.
When the action type is patrol, action type ID stands for patrol No. When the action type is
preset, action type ID stands for preset No.
6. Click Save.

4.8.1 Set One-Touch Park

This function is used to start park instantly.
Steps
1. Refer to Set Park Action to set a park action.
2. Click to start one-touch park.

4.9 Set Privacy Mask

Privacy mask enables you to cover certain areas on the live image to prevent certain spots in the
video security area from being live viewed and recorded.
Steps
1. Go to Configuration → PTZ → Privacy Mask.
2. Adjust the live image to the target scene via PTZ control buttons.
3. Draw the area.
25