Set Park Action; Set Privacy Mask - HIKVISION DS-2TD6267-75C4L/WY User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Clear Clear the set initial position.

9.8 Set Park Action

You can set the device to perform an action (for example, preset or patrol) or return to a position
after a period of inactivity (park time).
Before You Start
Set the action type first. For example, if you want to select patrol as park action, you should set the
patrol. See Set Patrol Scan for details.
Steps
1. Go to Configuration → PTZ → Park Action .
2. Check Enable Park Action.
3. Set Park Time: the inactive time before the device starts park action.
4. Select Action Type according to your needs.
Note
The VCA Type varies according to different action types.
5. Select an Action Type ID, if you select patrol or preset as action type.
When the action type is patrol, action type ID stands for patrol No. When the action type is
preset, action type ID stands for preset No.
6. Click Save.

9.9 Set Privacy Mask

Privacy masks cover certain areas on the live image to protect personal privacy from being live
viewed and recorded.
Steps
1. Go to Configuration → PTZ → Privacy Mask .
2. Select a channel.
3. Adjust the live image to the target scene via PTZ control buttons.
4. Draw the area.
Draw Area
Stop Drawing
5. Click Add.
It is listed in Privacy Mask List.
6. Edit Name, Type, and Active Zoom Ratio on your demand.
Click Draw Area, and click on the live view
image to determine the boundary of the mask.
Click Stop Drawing after drawing the mask.
52