Mitsubishi MELSEC QD75P User Manual page 683

Positioning module

Table of Contents

Appendix 6 Connection examples with servo amplifiers manufactured by Matsushita Electric

Industrial Co., Ltd.

Appendix 6.1 Connection example of QD75D

1: The logic for each I/O terminal can be changed with "

signal logic selection" in detailed parameters 1. (Negative logic is used for all terminals in the example above.)

2: The QD75D

inside the servo amplifier limit switches.

3: Refer to the manual of the servo amplifier for information on the servo amplifier side wiring and various signal

wire shields not shown above.

4: Use the same logic (positive logic/negative logic) for the QD75D

initially set to negative logic.

5: This indicates the distance between the QD75D

Manual pulse

Near-point dog

Upper limit 2

Lower limit 2

External command

upper limit (FLS) and lower limit (RLS) are used in the OPR retry function. Set these signals

Appendix - 41

Get other manuals https://www.bkmanuals.com

and MINAS-A series (Differential driver)

Input signal logic selection" and "

and servo amplifier. The QD75D

and MINAS-A.