Table of Contents
Advertisement
12 CONTROL SUB FUNCTIONS
[3] Setting method
Setting item
Stop command
processing for
Cd.42
deceleration stop
selection
For details of the setting details, refer to "Section 5.7 Control data list".
To use the "stop command processing for deceleration stop function", set the
following control data in a sequence program.
The set data are made valid as soon as they are written to the buffer memory.
The PLC ready signal [Y0] is irrelevant.
Setting
value
Set the stop command processing for
deceleration stop function.
0: Deceleration curve re-processing
1: Deceleration curve continuation
12 - 98
Get other manuals https://www.bkmanuals.com
Setting details
MELSEC-Q
Buffer memory address
1907
Advertisement
Table of Contents
