Section 8: Firmware Upgrade; Firmware Upgrade - Honeywell Fire-Lite Alarms ES-1000X Manual

In order to supply the latest features and functionality in fire alarm and life safety technology to our customers, we make frequent upgrades
to the embedded software in our products. To ensure that you are installing and programming the latest features, we strongly recommend that
you download the most current version of software for each product from www.firelite.com prior to commissioning any system. Contact
Technical Support with any questions about software and the appropriate version for a specific application.

8.1 Firmware Upgrade

The Firmware Upgrade option can be selected from the main menu screen after successful login as shown below:
Select 2 to login to the panel.
Select 2 to login as a User.
Select the appropriate User login ID:
Enter the User's Master level password. Only a user with master level programming rights can access Firmware Update. The following
screen will appear:
Pressing 1 for Firmware Upgrade while viewing Master Menu Screen #2 will cause the following screen to be displayed:
Before updating, the panel will save the current configuration of the system to a flash drive. The USB thumb drive must be in FAT32 file sys-
tem format. This is typically the default format. An error message will display if there is not enough free memory space on the flash drive.
The panel will prompt the user to enter a filename. Once complete, the screen will display:
Insert the flash drive with the hardware upgrade downloaded from www.firelite.com into the USB port J20 on the bottom edge of the main
panel circuit board. The firmware update file must be named EVO1000.skb.After the backup configuration screen, the following is dis-
played:
Press 1 for No to cancel or 2 for Yes to continue with the panel upgrade. The following screen will display if Yes is selected.
ES-1000X Series Manual — P/N LS10133-000FL-E:A 6/21/2023

Section 8: Firmware Upgrade

1=READ STATUS MODE
2=LOGIN
1=ADMINISTRATORS
2=USERS
3=NOT USED
1=USER 1
2=USER 2
3=USER 3
LOGIN FOR USER X
ENTER PASSWORD
MASTER MENU
1=PROGRAMMING MODE
2=FS-TOOL UP/DOWNLD
3=USB UP/DOWNLOAD
Master Menu Screen #1
FIRMWARE UPDATE
BACKUP CONFIG
FILENAME:
FIRMWARE UPDATE
FILE: EVO1000.skb
1=NO
2=YES
FIRMWARE UPDATE
MAIN MENU
SELECT ACCOUNT
SELECT USER
MASTER MENU
1=FIRMWARE UPDATE
Master Menu Screen #2
IN PROGRESS
PLEASE WAIT
123