Honeywell Fire-Lite Alarms ES-1000X Manual page 122

USB Upload/Download
The following screen will be displayed while the program is sent to the USB drive:
An error message will display if there is no USB drive inserted in the FACP or if there is an existing configuration saved on the drive with
the same file name.
While this screen is displayed, USB programming uploads are allowed. Exiting this screen will disable any further uploads to a flash drive.
Also, following 30 minutes of inactivity (including up/downloading), the Accept Upload screen will time-out, causing the display to return
to the System Normal screen.
Similarly, the following screen will display when 2 for Download Program is pressed.
Pressing 2 for Yes will cause the following screen to be displayed:
An error message will display if there is no USB drive inserted in the FACP or if there is no existing configuration saved on the USB drive.
While this screen is displayed, local programming downloads are allowed. Exiting this screen will disable any further downloads to a flash
drive. Also, following 30 minutes of inactivity (including up/downloading), the Accept Download screen will time-out, causing the display
to return to the System Normal screen.
Important!
The program database created by the FS-Tools programming utility will be called, "FS_1000.cfg" on the USB flash drive. Before loading the
new database into the fire panel, the existing database will be saved as file, "FS_1000.bak" on the USB flash drive. Only one new and one
saved database can reside on the USB flash drive.
122
USB UP/DOWNLOAD
SYSTEM CONFIGURATION
TRANSFER IN PROCESS
PLEASE WAIT
DOWNLOAD FROM USB
FILE: FS_1000.cfg
1=NO
2=YES
USB UP/DOWNLOAD
SYSTEM CONFIGURATION
TRANSFER IN PROCESS
PLEASE WAIT
ES-1000X Series Manual — P/N LS10133-000FL-E:A 6/21/2023
USB Upload/Download